Skip to content

Opportunity overview

Active Federal PPRA / EPADS Official source

GEOTECHNICAL INVESTIGATIONS - FIXED BASE OPERATOR (FBO) FACILITY AT ISLAMABAD INTERNAITONAL AIRPORT PROJECT

NESPAK (GT&GED)

Reference: P186303

Tender information

Published
Submission deadline
Not specified
Procurement method
Request for Quotation
Procuring agency
NESPAK (GT&GED)
Location
Lahore , Punjab

Tender description

  • GEOTECHNICAL INVESTIGATIONS - FIXED BASE OPERATOR (FBO) FACILITY AT ISLAMABAD INTERNAITONAL AIRPORT PROJECT

Technical Specifications

GEOTECHNICAL INVESTIGATIONS - FIXED BASE OPERATOR (FBO) FACILITY AT ISLAMABAD INTERNAITONAL AIRPORT PROJECT

Specification
Mobilization and demobilization of at least one (01) straight rotary / percussion drilling rig alongwith allied accessories at site including setting up and shifting from one investigation point to another. The equipment should be sufficient enough to complete the work within scheduled time. Minimum diameter of borehole should be 125 mm for rotary drilling and 200 mm for percussion drilling. L.S.
Specification
Execution of three (03) boreholes up to a maximum depth of 15 m at building location below existing ground level or upto rock strike level by using straight rotary/percussion drilling rig including backfilling of boreholes to their original position by cement-sand-bentonite mix. L.M.
Specification
Continuous core drilling (NX Size) in bedrock upto maximum depth of 5 m below rock strike level using double tube core barrel with core orientation, including extraction, preservation of core samples in core boxes, waxing, packing, preservation of core samples, photography of rock cores and transportation of core samples to the laboratory. L.M.
Specification
Performance of Standard Penetration Tests (SPTs) in boreholes along with collection of SPT samples at 1.0 m interval in general, or as necessary, including their labelling, packing, storage & transportation to an approved testing laboratory. No.
Specification
Collection of undistrubed soil samples from boreholes through Shelby/denison/pitcher samplers/tube, including their waxing, labelling, packing, storage & transportation to an approved testing laboratory. No.
Specification
Collection of water samples (if encountered) from augerholes including their labelling, packing, storage & transportation to an approved testing laboratory. No.
Specification
Sieve analysis No.
Specification
Hydrometer Analysis No.
Specification
Liquid and plastic limits No.
Specification
Bulk density & dry density No.
Specification
Consolidation with Swell Pressure Measurement No.
Specification
Unconfined compression No.
Specification
Direct Shear Test No.
Specification
Uniaxial compression No.
Specification
Point Load Index on Rock Samples No.
Specification
Sulphate content of soil No.
Specification
Chloride content of soil No.
Specification
Organic matter content of soil No.
Specification
Complete chemical analysis of water samples i/c TDS, Cl, SO4 & pH No.
Specification

Official source

Always confirm dates, documents, and submission instructions on the originating portal.

View original tender on Federal PPRA / EPADS