Skip to content

Opportunity overview

Active Federal PPRA / EPADS Official source

Renovation of Washroom and Washing area for clothes near to Police Dormitory at SBP BSC Quetta

SBP Banking Services Corporation (SBP Banking Services Corporation (BSC))

Reference: P165792

Tender information

Published
Submission deadline
Not specified
Category
Civil construction
Procurement method
Request for Quotation
Procuring agency
SBP Banking Services Corporation (SBP Banking Services Corporation (BSC))

Tender description

  • Renovation of Washroom and Washing area for clothes near to Police Dormitory at SBP BSC Quetta
  • Dismantling of existing washroom complete, including careful removal of existing sanitary fixtures, doors, windows and other reusable items; stacking of serviceable items at a designated location within the Bank premises; dismantling/removal of exist
  • Levelling and repairing of existing slab surface by applying an average ¾-inch thick cement-sand slurry/mortar in 1:4 proportion, incorporating an approved latex-based concrete bonding agent at approximately 3 litres per 50 kg bag of cement, or as re
  • Providing and laying approved-quality Schedule-40 uPVC waste-water pipes, including all required uPVC fittings, bends, sockets, joints, solvent cement/solution and other necessary accessories, properly aligned and connected to the existing/proposed d
  • Providing & fixing in position, uPVC floor trap for floor drains with heavy duty stainless steel jali set of 6” x 6” size, complete in all respects as per site requirements and as directed by the Engineer In-charge.
  • Providing, laying/fixing as per required slopes and levels & testing of medium grade GI pipe of 1/2
  • Providing and fixing half pedestal washbasin including the cost of stainless steel screws, approved quality bottle trap, connection pipes, waste pipes ,T cock etc. complete in all respects as per site requirements and as directed by the Engineer In-c
  • Providing and installation of complete set of Washrooms accessories which include, towel rail, soap dish, coat hanger, brush holder etc., complete in all respects, as directed by Engineer in charge.
  • Providing and constructing brick masonry partition walls using available/reusable bricks at site, laid in 1:4 cement-sand mortar, including bonding, alignment, levelling and curing, complete as per site requirements and directions of the EIC.
  • Providing and applying cement-sand plaster in 1:4 proportion over masonry walls up to 8 feet height, using approved-quality sand, including surface preparation, corner finishing, levelling and smooth finish, complete in all respects as per site requi
  • Providing and laying Plain Cement Concrete (PCC) 1:2:4 for flooring of the washroom and washing area/pad outside the washroom entrance, using approved-quality cement, sand and coarse aggregate, including surface preparation, levelling, compaction and
  • Fixing/installation of available wooden doors within the washroom block, including 02 Nos. internal doors of approximately 2'-6
  • Providing and laying approved-quality glazed/semi-glazed ceramic tiles on washroom floors and walls, laid over an average 1-inch thick cement-sand mortar bed, including surface preparation, cutting, fitting, levelling, alignment, jointing with approv
  • Providing and fixing complete bath shower set in one washroom unit, comprising approved-quality shower mixer/valve, overhead shower, hand shower where required, shower arm, flexible connection, necessary CP fittings, wall connections and all required
  • Providing and fixing approved-quality Indian-type WC (squatting commode) in the other washroom portion, complete with P-trap/S-trap as required, flush cistern, flush pipe, seat/cover where applicable, necessary connectors, fittings and accessories, i
  • Fabrication and installation of steel frame structure for shed using available 3

Technical Specifications

Renovation of Washroom and Washing area for clothes near to Police Dormitory at SBP BSC Quetta View Proposed BoQ — Renovation of Washroom and Washing area for clothes near to Police Dormitory at SBP BSC Quetta

Specification
Dismantling of existing washroom complete, including careful removal of existing sanitary fixtures, doors, windows and other reusable items; stacking of serviceable items at a designated location within the Bank premises; dismantling/removal of existing wall tiles; dismantling of 9-inch thick masonry wall to provide opening at the rear side; loading, transportation and disposal of debris outside the Cantt. limits, as required, all complete as per site requirements and directions of the Engineer-In-Charge (EIC). Sft
Specification
Levelling and repairing of existing slab surface by applying an average ¾-inch thick cement-sand slurry/mortar in 1:4 proportion, incorporating an approved latex-based concrete bonding agent at approximately 3 litres per 50 kg bag of cement, or as recommended by the manufacturer/EIC, including surface preparation, mixing, application and finishing, complete in all respects. Sft
Specification
Providing and laying approved-quality Schedule-40 uPVC waste-water pipes, including all required uPVC fittings, bends, sockets, joints, solvent cement/solution and other necessary accessories, properly aligned and connected to the existing/proposed drainage system, complete in all respects as per site requirements and directions of the EIC. Rft
Specification
Providing & fixing in position, uPVC floor trap for floor drains with heavy duty stainless steel jali set of 6” x 6” size, complete in all respects as per site requirements and as directed by the Engineer In-charge. Each
Specification
Providing, laying/fixing as per required slopes and levels & testing of medium grade GI pipe of 1/2" dia., of IIL or other approved equivalent make conforming to ASTM-A53/BS1387 or EN 39, including the cost of cutting where required, making of threads and jointing with approved quality GI sockets/elbows/bends etc., complete in all respects as per site requirements and as directed by the Engineer In-Charge. Rft
Specification
Providing and fixing half pedestal washbasin including the cost of stainless steel screws, approved quality bottle trap, connection pipes, waste pipes ,T cock etc. complete in all respects as per site requirements and as directed by the Engineer In-charge. Each
Specification
Providing and installation of complete set of Washrooms accessories which include, towel rail, soap dish, coat hanger, brush holder etc., complete in all respects, as directed by Engineer in charge. Set
Specification
Providing and constructing brick masonry partition walls using available/reusable bricks at site, laid in 1:4 cement-sand mortar, including bonding, alignment, levelling and curing, complete as per site requirements and directions of the EIC. Cft
Specification
Providing and applying cement-sand plaster in 1:4 proportion over masonry walls up to 8 feet height, using approved-quality sand, including surface preparation, corner finishing, levelling and smooth finish, complete in all respects as per site requirements and directions of the EIC. Sft
Specification
Providing and laying Plain Cement Concrete (PCC) 1:2:4 for flooring of the washroom and washing area/pad outside the washroom entrance, using approved-quality cement, sand and coarse aggregate, including surface preparation, levelling, compaction and finishing, complete in all respects as per site requirements and directions of the EIC. Cft
Specification
Fixing/installation of available wooden doors within the washroom block, including 02 Nos. internal doors of approximately 2'-6" × 7'-0" and 01 No. main entrance door of approximately 3'-6" × 7'-0", including necessary frames/fixing hardware as available/required, proper alignment and installation, complete as per site requirements and directions of the EIC. Each
Specification
Providing and laying approved-quality glazed/semi-glazed ceramic tiles on washroom floors and walls, laid over an average 1-inch thick cement-sand mortar bed, including surface preparation, cutting, fitting, levelling, alignment, jointing with approved-quality tile grout/joint filler and cleaning, complete in all respects as per site requirements and directions of the EIC. Sft
Specification
Providing and fixing complete bath shower set in one washroom unit, comprising approved-quality shower mixer/valve, overhead shower, hand shower where required, shower arm, flexible connection, necessary CP fittings, wall connections and all required accessories, including cutting/chasing of wall, connection to existing/proposed water-supply lines, testing and making good the affected surfaces, complete in all respects as per site requirements and directions of the Engineer-In-Charge (EIC). Set
Specification
Providing and fixing approved-quality Indian-type WC (squatting commode) in the other washroom portion, complete with P-trap/S-trap as required, flush cistern, flush pipe, seat/cover where applicable, necessary connectors, fittings and accessories, including connection to the existing/proposed water-supply and soil/wastewater drainage lines, testing and making good all affected surfaces, complete in all respects as per site requirements and directions of the EIC. Each
Specification
Fabrication and installation of steel frame structure for shed using available 3" dia. MS pipes for vertical/support members and 1" × 1" MS angle iron for framing, including cutting, fitting, alignment, welding and fixing/anchoring of the frame to the existing masonry wall, complete. Providing and fixing available 20 SWG MS sheet over the fabricated frame, including cutting, fitting, welding and all necessary accessories. The complete steelwork shall be thoroughly cleaned, prepared and finished with one coat of red oxide primer followed by two coats of approved-quality enamel paint of the required colour, including all labour, materials, welding, grinding and finishing, complete in all respects as per site requirements and to the satisfaction of the Engineer-in-Charge. Sft
Specification

Official source

Always confirm dates, documents, and submission instructions on the originating portal.

View original tender on Federal PPRA / EPADS